News
Stand Up Pouch Sizes Chart: Dimensions and Fill Weights from 100 g to 5 kg
HomeNewsStand Up Pouch Sizes Chart: Dimensions and Fill Weights from 100 g to 5 kg

Stand Up Pouch Sizes Chart: Dimensions and Fill Weights from 100 g to 5 kg

2026-11-11
View:492

5841774854701339.jpg

A standard stand up pouch ranges from 100 × 150 + 30 mm for 100 g fills up to 300 × 450 + 90 mm for 5 kg bulk packs. Dimensions are always written as width × height + bottom gusset in millimetres. Because fill weight depends on your product's bulk density — not on pouch volume alone — the same 500 ml pouch holds 200 g of ground coffee but 350 g of rice. This guide gives the standard size table, the calculation formula, and bulk density values for common products.

Key Facts

  • Size notation: W × H + G (width × height + bottom gusset), in mm

  • Smallest common size: 90 × 140 + 30 mm (≈ 80–100 g)

  • Largest common size: 300 × 450 + 90 mm (up to 5 kg with reinforced handle)

  • Usable volume: ≈ W × H × G × 0.65 (cm, giving millilitres)

  • Custom dimensions available: from 1,000 pcs (digital printing)

  • Standard lead time: 15–20 working days

1. How Stand Up Pouch Sizes Are Measured

Three numbers define every stand up pouch:

DimensionWhat it meansWhere measured
Width (W)Flat pouch width, edge to edgeAcross the front panel
Height (H)Total height including top sealBottom edge to top edge
Gusset (G)Depth of the folded bottom panelThe bottom fold, opened flat

Two adjustments matter when specifying

  • Usable height = total height − ~40 mm for the top seal and zipper. A 200 mm pouch gives about 160 mm of fillable height.

  • Gusset when open determines base footprint. A 50 mm gusset opens to roughly a 45 × 130 mm oval base — this is what makes the pouch stand.

2. Stand Up Pouch Size Chart (Standard Reference Sizes)

Fill (typical)Dimensions (W × H + G)Usable VolumeCommon Applications
50–100 g90 × 140 + 30 mm~180 mlSamples, tea, candy, single-serve
100 g100 × 150 + 30 mm~215 mlCoffee 100 g, snacks, nuts
250 g140 × 220 + 40 mm~650 mlCoffee 250 g, dried fruit, granola
500 g170 × 280 + 50 mm~1,300 mlCoffee 500 g, protein powder, grains
1 kg210 × 320 + 70 mm~2,650 mlCoffee 1 kg, rice, pet treats
2 kg240 × 380 + 80 mm~4,200 mlPet food, bulk powder
3 kg260 × 420 + 90 mm~5,800 mlPet food, industrial powder
5 kg300 × 450 + 90 mm~7,900 mlRice, bulk pet food, with handle

Usable volume assumes a 40 mm deduction for top seal and zipper; actual fill weight depends on product density (see section 4).

3. The Formula: Calculating the Right Pouch Size

Step 1 — Convert your target fill weight to volume

Volume (ml) = Fill weight (g) ÷ Bulk density (g/ml)

Step 2 — Convert volume to pouch dimensions

Volume (ml) ≈ W (cm) × Husable (cm) × G (cm) × 0.65

Worked Example — 500 g of Roasted Coffee Beans

Step 1
Coffee bean bulk density ≈ 0.38 g/ml
Step 2
Required volume = 500 ÷ 0.38 = 1,316 ml
Step 3
Try a 170 × 280 + 50 mm pouch: 17 × 24 × 5 × 0.65 = 1,326 ml ✓
Step 4
Add headspace for degassing: a one-way valve handles CO₂, so 1,316 ml is sufficient

Worked Example — 1 kg of White Rice

Step 1
Rice bulk density ≈ 0.82 g/ml
Step 2
Required volume = 1,000 ÷ 0.82 = 1,220 ml
Step 3
A 170 × 280 + 50 mm pouch (1,326 ml) is sufficient — rice needs a smaller pouch than the weight suggests, because it is dense.
This is the most common sizing mistake: specifying by weight instead of volume. Two 500 g products can need pouches that differ by 2× in capacity.

4. Bulk Density Reference Table

ProductBulk Density (g/ml)500 g Needs1 kg Needs
Tea leaves0.30–0.401,250–1,670 ml2,500–3,330 ml
Coffee beans (whole)0.35–0.401,250–1,430 ml2,500–2,860 ml
Coffee (ground)0.45–0.501,000–1,110 ml2,000–2,220 ml
Pet kibble0.45–0.55910–1,110 ml1,820–2,220 ml
Protein powder0.50–0.60830–1,000 ml1,670–2,000 ml
Nuts0.55–0.65770–910 ml1,540–1,820 ml
Candy0.70–0.80625–715 ml1,250–1,430 ml
Rice0.80–0.85590–625 ml1,180–1,250 ml
Detergent powder0.60–0.75670–830 ml1,330–1,670 ml

Values are typical ranges. Always confirm with a physical fill trial — particle shape and moisture content shift density by 10–15%.

5. Size Selection by Application

ApplicationRecommended SizeWhy
Specialty coffee 250 g140 × 220 + 40 mmFits valve + zipper without crowding the panel
Coffee 1 kg210 × 320 + 70 mmWide enough for a 5-panel print layout
Snack chips 100 g130 × 200 + 40 mmHigh fill ratio with nitrogen flushing headspace
Protein powder 1 kg210 × 320 + 70 mmScoop-friendly opening, rigid base
Pet treats 500 g170 × 280 + 50 mmPuncture-resistant structure holds shape
Pet food 5 kg300 × 450 + 90 mmReinforced gusset + handle, 1.5 m drop tested
Liquid soap 500 ml130 × 220 + 40 mm + spoutSpout placement needs 25 mm clearance
Sauce 1 kg (retort)190 × 300 + 60 mmRetort-grade seal lane ≥ 8 mm

6. Four Sizing Mistakes That Cost Money

  1. Sizing by weight instead of volume — the single biggest cause of repurchasing. Use the density table above.

  2. Forgetting the top seal allowance — a 200 mm pouch has only ~160 mm of usable height; designs placed above that get sealed into the seam.

  3. Ignoring the zipper — a press-to-close zipper consumes 20–25 mm; a slider zipper needs more.

  4. Underestimating the gusset for heavy fills — 5 kg in a 70 mm gusset will bulge and tip. 90 mm plus a reinforced K-seal is the minimum.

7. Custom Sizes and Order Quantities

Any dimension can be customised. MOQ depends on the printing method:

  • Digital printing: from 1,000 pcs, no plate fee, 10–15 days

  • Rotogravure (10-colour): from 10,000 pcs, plate fee charged once, 15–20 days

Send a physical product sample and Meiji's engineering team will calculate the exact volumetric die-line — this removes the guesswork entirely.

Need a Custom Stand Up Pouch Size?

Share your product type, target fill weight, pouch dimensions, order quantity, and packaging requirements. Meiji Packaging can help you evaluate a suitable pouch size and custom structure.

Get a Custom Pouch Quote

8. FAQ

What is the most common stand up pouch size?170 × 280 + 50 mm (about 500 g) and 140 × 220 + 40 mm (about 250 g) are the two most frequently ordered sizes, covering coffee, snacks, powders and pet treats.
How do I know what size pouch I need?Divide your target fill weight by the product's bulk density to get the required volume, then match it against the size chart. For 500 g of coffee beans (0.38 g/ml), that is 1,316 ml — a 170 × 280 + 50 mm pouch.
Can I get a custom size between 1 kg and 5 kg?Yes. Any dimension can be customised, with no restriction to the sizes listed here. Digital printing starts at 1,000 pcs.
What does the "+50" mean in 170 × 280 + 50 mm?It is the bottom gusset depth in millimetres — the folded panel that opens to form the standing base.
What size stand up pouch fits 1 kg of coffee?210 × 320 + 70 mm. Whole beans need slightly more volume than ground coffee at the same weight.
Do you provide free size recommendations?Yes. Send your product, fill weight and target shelf life, and Meiji's engineers will return a recommended die-line and film structure.

9. Need a Size Recommendation?

Meiji Packaging manufactures custom stand up pouches from 100 g to 5 kg in Wuxi, China — BRCGS and ISO 9001:2015 certified, with MOQ from 1,000 pcs and 15–20 day lead times. Send your product specs and get a die-line recommendation within 24 hours.

Get the Right Stand Up Pouch Size for Your Product

Send us your product sample, fill weight, target dimensions, order quantity, and shelf-life requirements. Our engineering team can recommend a suitable pouch size and film structure for your application.

Request a Size Recommendation →

Please Contact Us!